NEC Univerge SV9100 - ACI Delay Announcement

Issue 1.0
SV9100 Programming Manual 2-513
Description
Use Program 41-10 : ACI Delay Announcement to define the ACI port number to be used for the delay
announcement.
This program is activated when the delay announcement source and options are assigned as ACI in
Program 41-08-03.
Conditions
None
Feature Cross Reference

Contact Center
Program 41 : ACD Setup
41-10 : ACI Delay Announcement
Level:
SA
Input Data
Group No 01~64
Item
No.
Item Input Data Default
01
1st Delay Announcement ACI Port Number
0~96
0 = No Setting
0
02
2nd Delay Announcement ACI Port Number
0~96
0 = No Setting
0
03
1st Delay Announcement Connection Timer
Set the time before the 1st Delay Announcement is played.
0~64800 (sec)
4
04
2nd Delay Announcement Connection Timer
Set the time the 1st Delay Announcement plays before the 2nd
Delay Announcement starts to play.
0~64800 (sec)
60
05
2nd Delay Announcement Sending Duration
Set the time the 2nd Delay Announcement plays. After this time
expires, the call disconnects. To keep the call in queue, set this
time to 0.
0~64800 (sec)
0