NEC Univerge SV9100 - Outbound IP Connection Setup

Issue 4.0
SV9100 Programming Manual 2-887
Description
Use Program 90-69 : Outbound IP Connection Setup to set the outbound IP connection information.
Conditions
None
Feature Cross Reference
None
Program 90 : Maintenance Program
90-69 : Outbound IP Connection Setup
Level:
IN
Input Data
Item
No.
Item Input Data Default
01
Port Number
Assign the port number used for Outbound
IP Connection programming.
1~65535 8000
02
IP Address
Assign the IP Address that the system will
use for TCP establishment request to I.E.
the IP address of the PC with the waiting PC
Programming.
0.0.0.0~255.255.255.255 0.0.0.0
03
Caller ID
Assign Caller ID number of the system to
compare with the received Caller ID.
Maximum of 16 digits
(0~9,
, #)
None