NEC Univerge SV9100 - 1 St Party CTI Authentication Password Setup

Issue 4.0
SV9100 Programming Manual 2-885
Description
Use Program 90-65 : 1st Party CTI Authentication Password Setup to set the authentication
password.
Conditions
None
Feature Cross Reference
None
Program 90 : Maintenance Program
90-65 : 1st Party CTI Authentication Password Setup
Level:
IN
Input Data
Item
No.
Item Input Data Default
01
Password
Sets the authentication password when
the 1st Party CTI application is connected
to the system via a NAT router. If a
password is not set, the system does not
certify it.
Up to 16 characters nec-i