NEC Univerge SV9100 - Trunk Group Routing for Networking

Issue 4.0
SV9100 Programming Manual 2-351
Description
Use Program 21-16 : Trunk Group Routing for Networking to assign Program 14-06 routes for a
networked system. This is required to seize the trunk in a networked system (Extension in System A
tries to make an external call using a trunk in System B).
The route number is specified for each system ID (01~50).
Conditions
None
Feature Cross Reference

Central Office Calls, Placing
 Networking, NetLink
 Networking
Program 21 : Outgoing Call Setup
21-16 : Trunk Group Routing for Networking
Level:
IN
Input Data
System ID 01~50
Item
No.
Day/Night
Mode
Route Table Number Default Related Program
01 1~8 0~100
(0 = No Setting)
1 14-06-01