SV9100 Programming Manual 2-241
Program: 16
Description
Use Program 16-01 : Department Group Basic Data Setup to set the function mode for each
department group. There are 64 available Department Groups.
Program 16 : Department Group Setup
16-01 : Department Group Basic Data Setup
Level:
IN
Input Data
Department Group Number 1~64
Item
No.
Item Input Data Default
Related
Program
01
Department Name
Maximum 12 characters
No
setting
11-07
02
Department Calling Cycle
Set the call routing for Department Calling.
Routing can be either circular (cycles to all
phones in group) or priority (cycles to
highest priority extensions first).
0 = Normal Routing (Priority)
1 = Easy – UCD Routing (Circular)
0 16-02
03
Department Routing when Busy (Auto
Step Call)
Set how the system routes an Intercom call
to a busy Department Group member.
Intercom callers to the extension can either
hear busy or route to the first available
department number. This only occurs for
calls to the extension directly, not the
department number assigned in Program 11-
07.
0 = Normal (Intercom caller to busy
department member hears
busy)
1 = Circular (Intercom callers to
busy department member
routes to idle member)
0 16-02
04
Hunting Mode
Set the action taken when a call reaches the
last extension in the Department Group (0 =
hunting stopped, 1 = hunting repeats with
circular routing through the Department
Group).
0 = Last extension is called and
hunting is stopped
1 = Circular
0
To Next Page
Loading...
