NEC Univerge SV9100 - Page 282

Issue 4.0
2-242 Program 16 : Department Group Setup
Conditions
None
Feature Cross Reference

Department Calling
05
Extension Group All Ring Mode
Operation
Determine whether calls ringing a
Department Group should ring all extensions
in the group simultaneously automatically or
manually when using the service code
defined in Program 11-12-09.
 When set to (1) Automatic, only
ICM Calls and DID Calls will ring all
the stations in the Department Group.
0 = Manual
1 = Automatic
0 11-16-10
06
STG Withdraw Mode
0 = Disable (Camp On)
1 = Enable (Overflow Mode)
0
07
Call Recall Restriction for STG
Determine whether or not an unanswered
call transferred to a Department Group
should recall the extension from which it was
transferred.
0 = Disable (Recall)
1 = Enable (No Recall)
0
08
--- Not Used ---
09
Department Hunting No Answer Time
Set the time a call rings a Department group
extension before hunting occurs.
0~64800 seconds
15
10
Enhanced Hunt Type
Set the type of hunting for each Extension
(Department) Group.
0 = No queuing
1 = Hunting When Busy
2 = Hunting When Not Answered
3 = Hunting When Busy or No
Answer
0
Item
No.
Item Input Data Default
Related
Program