NEC Univerge SV9100 - Main Software Information

Issue 4.0
SV9100 Programming Manual 2-841
Description
Use Program 90-16 : Main Software Information to display the main software information on the
GCD-CP10. Main software information can also be viewed outside of system programming by pressing
Feature and the 3 key on any multiline terminal.
Conditions
This Program is Read Only.
Feature Cross Reference
None
Program 90 : Maintenance Program
90-16 : Main Software Information
Level:
IN
Input Data
Item
No.
Item Input Data Component
01
Version Number
at present format is :
1.XX.XX e.g.
1.49.36
ASCII Code
(5 Bytes)
02
Software Release Date
May 22 2002 17:53:46
ASCII Code
(20 Bytes)