NEC Univerge SV9100 - DT800;DT700 Multiline Firmware Name Setup

Issue 4.0
2-794 Program 84 : Hardware Setup for VoIP
Description
Use Program 84-28 : DT800/DT700 Multiline Firmware Name Setup to set the firmware name to
download for the IP Phone.
Conditions
None
Feature Cross Reference

Voice Over Internet Protocol (VoIP)
Program 84 : Hardware Setup for VoIP
84-28 : DT800/DT700 Multiline Firmware Name Setup
Level:
IN
Index 1
Terminal Type 1 = ITL-**E-1D/IP-*E-1
2 = ITL-**D-1D/ITL-24BT1D/ITL-24PA-1D
3 = ITL-320C-1
4 = Not used
5 = ITL-**DG-3
6 = ITL-**CG-3
7 = ITL-2CR-1
8 = ITZ-**D-*D/ITZ-**PD-*D/ITZ-**pA-*D/ITZ-**DG/ITZ-**LDG/ITZ-**LD
9 = ITZ-**CG
10 = ITY-6D
11 = ITY-8LDX
Item
No.
Item Input Data Default
01
Firmware Directory
Maximum 64 characters
No Setting
02
Firmware File Name
Maximum 30 characters
No Setting