Issue 4.0
SV9100 Programming Manual 2-793
Conditions
None
Feature Cross Reference
Voice Over Internet Protocol (VoIP)
23
Maximum MCU Group Number (Mode 2)
Note when changing this PRG all DSP
resources are reset when idle. In progress calls
are not affected but until all DSP resources go
idle this change will not take affect.
This setting reserves VoIP DSP resources for
mode 2 video conferences. When a DSP
resource is reserved it is not available for SIP
voice calls.
VoIP DSP resources are shared between video
and voice calls. The system will always keep 64
resources for voice calls. When changing this
program if resources are exceeded the system
will provide an error message and will not allow
the setting to be changed.
0 = No MCU video channels
reserved.
1 = 4 MCU video Mode 1
channels reserved.
0
Item
No.
Item Input Data Default
To Next Page
Loading...
