Issue 4.0
SV9100 Programming Manual 2-479
Description
Use Program 34-06 : Add/Delete Digit for E&M Tie Line to set digits that the system should add or
delete for Tie Lines.
Delete Digit
Some Tie Line networks pass the location number and extension number to the remote side. This
program allows the system to ignore such numbers for a call.
If individual extension users do not want to receive an incoming call, they could delete all digits including
the extension number.
Add Digit
If a Tie Line network requires additional digits to reroute the call to a location, the digits for the location
can be added to the received digits.
Conditions
None
Feature Cross Reference
Tie Lines
Program 34 : Tie Line Setup
34-06 : Add/Delete Digit for E&M Tie Line
Level:
IN
Input Data
Incoming Trunk Group Number 001~100
Item
No.
Item Input Data Default
01
Delete Digit
0~255 (255 = delete all digits)
0
02
Additional Dial Digits
Up to four digits (0~9, , #)
No Setting
To Next Page
Loading...
