Issue 4.0
SV9100 Programming Manual 2-427
Description
Use Program 26-02 : Dial Analysis Table for ARS/LCR to set pre-transaction tables for selecting
Automatic Route Selection (ARS).
Service Type 1 (Route to Trunk Group Number) – The number routes to a trunk group.
Service Type 2 (F-Route Selected) – The number is controlled by the F-Route table.
Program 26 : ARS Service
26-02 : Dial Analysis Table for ARS/LCR
Level:
IN
Input Data
Dial Analysis Table Number 1~2000
Item
No.
Item Input Data Default
Related
Programming
01
Dial
Dial Digits (16 digits maximum)
1~9, 0,
, #, or for wild character (Press line key 1)
No
Setting
02
ARS Service
Type
0 = No Service (None)
1 = Route to Trunk Group
2 = Select F-Route Access
0
03
Additional Data /
Service Number
If Service Type 1 (in 26-02): Select Trunk Group Number
[0~100, 101~150 (100+Networking ID),
0= No Route]
If Service Type 2 (in 26-02):
F-Route Time Schedule Not Used = 0~500
(F-Route Table Number).
Refer to Program 44-05 : ARS/F-Route Table on page 2-555.
F-Route Time Schedule Used = 0~500
(F-Route Selection Number).
Refer to Program 44-04 : ARS/F-Route Selection for Time
Schedule on page 2-554.
0 44-04
44-05
04
ARS Class of
Service
0~50
0
05
Dial Treatment
for ARS
0~50
0
To Next Page
Loading...
