NEC Univerge SV9100 - System Information Output

Issue 4.0
2-840 Program 90 : Maintenance Program
Description
Use Program 90-13 : System Information Output to define the output port to be used as the system
information output.
Conditions
None
Feature Cross Reference
None
Program 90 : Maintenance Program
90-13 : System Information Output
Level:
IN
NOTE

This program is available only via telephone programming and not through PC
Programming.
Input Data
Item
No.
Item Input Data Default
01
Output Port Type
Indicate the type of connection used to print the
system information.
0 = No Setting
1~3 = -- Reserved --
4 = Not used
5 = USB Memory
0
04
Output Destination System ID
0~50
0
05
Output Command
Dial 1+ press Transfer
(Press Transfer to cancel.)
–