NEC Univerge SV9100 - IP System ID

Issue 4.0
SV9100 Programming Manual 2-47
Description
Use Program 10-27 : IP System ID to set the IP address of the networked IP systems.
Conditions
None
Feature Cross Reference
None
Program 10 : System Configuration Setup
10-27 : IP System ID
Level:
IN
Input Data
Item
No.
Item Input Data Default
01
IP Address
System ID is related with the System ID
in the Numbering Plan (Program
11-01-03). When the digits are analyzed
and the system ID is determined from
the SV9100 data set in the Numbering
Plan, the networking call is sent to the
IP Address set in this program.
The IP Address should be the IP
Address of the peer CPU (Program
10-12-01).
0.0.0.0~126.255.255.254
128.0.0.1~191.255.255.254
192.0.0.1~223.255.255.254
0.0.0.0
02
Call Procedure Port
The Port Number should be set with the
same value as the H.225 setup port in
Program 84-02-33.
1~65535
1730