Issue 4.0
2-816 Program 90 : Maintenance Program
Description
Use Program 90-03 : Save Data to save the programmed data on the USB Flash Drive. This program
should be used after changing the programmed data.
Conditions
When reloading a customer database, the system must be reset (either using Program 90-08 or
power down/power up) before all uploaded programming takes affect.
Feature Cross Reference
None
Program 90 : Maintenance Program
90-03 : Save Data
Level:
SA
This program is available only via telephone programming and not through PC
Programming.
Input Data
Item No. Item Input Data
01
Data Save
Dial 1 + press Transfer (Press Transfer to cancel.)
02
DIM Log Save
Dial 1 + press Transfer to copy DIM log from SD Drive to USB
drive.
03
Save Statistical Information for
RTP
Dial 1 + press Transfer to copy RTP Statistical Information file
from SD Drive to USB drive.
To Next Page
Loading...
