NEC Univerge SV9100 - Delete Command

Issue 4.0
SV9100 Programming Manual 2-903
Description
Use Program 92-07 : Delete Command to delete the data of each extension number of each extension
group or each table. .
The following table lists Programs that use the Delete Command function.
Program 92 : Copy Program
92-07 : Delete Command
Level:
IN
NOTE

This program is available only via telephone programming and not through PC
Programming.
Input Data
Program Number XX-XX
Item
No.
Item Input Data
01
Destination Number (From)
Each extension port = 1~960 (PRG 11-02)
Each virtual extension port = 1~512 (PRG 11-04)
Each ACI port number = 1~96 (PRG 11-06)
Each extension group = 1~64 (PRG 11-07)
Each ACI group = 1~64 (PRG 11-08)
Each group = 1~64 (PRG 11-17)
02
Destination Number (To)
Program
Number
Program Name
11-02 Extension Numbering
11-04 Virtual Extension Numbering
11-06 ACI Extension Numbering
11-07 Extension (Department) Group Pilot Number
11-08 ACI Group Pilot Number
11-17 Group Pilot Number