NEC Univerge SV9100 - ISDN BRI & PRI Layer 2 (T-Point) Initial Data Setup

Issue 4.0
SV9100 Programming Manual 2-705
Description
Use Program 81-05 : ISDN BRI & PRI Layer 2 (T-Point) Initial Data Setup to define the various basic
data for layer 2 of ISDN BRI and PRI.
Conditions
None
Feature Cross Reference
None
Program 81 : Basic Hardware Setup for Trunk
81-05 : ISDN BRI & PRI Layer 2 (T-Point) Initial Data Setup
Level:
MF
Input Data
Item
No.
Item Description Input Data Default
01
Timer T200 Specify the timer value in 1/100ths of a
second at the end of which transmission of
a frame may be initiated.
1~255
(100~25500ms)
10 (1sec)
02
Timer T201 Specify the minimum time in 1/100ths of a
second between retransmissions of the
TEI Identity check messages.
1~255
(100~25500ms)
10 (1sec)
03
Timer T202 Specify the minimum time in 1/100ths of a
second between retransmissions of the
TEI Identity check messages.
1~255
(100~25500ms)
20 (2sec)
04
Timer T203 Specify the maximum time in 1/100ths of a
second allowed without exchanging
frames.
1~255
(100~25500ms)
250 (25sec)
05
N200 Specify the retransmission count.
1~255
3
06
N201 Specify the frame lengths in ocelots.
1~65535 (Byte)
260
07
N202 Specify the maximum number of
transmissions from a TEI identity request
message when the user requests a TEI.
1~255
3