NEC Univerge SV9100 - Trunks Operator Setting

Issue 4.0
SV9100 Programming Manual 2-305
Description
Use Program 20-36 : Trunk’s Operator Setting to assign a trunk to an operator group.
Conditions
None
Feature Cross Reference
None
Program 20 : System Option Setup
20-36 : Trunk’s Operator Setting
Level:
IN
Input Data
Trunk Port Number 001~400
Item
No.
Item Input Data Default
01
Trunk’s Operator Setting
Allow the user to select Operator Group per trunk.
0~15
(0 = Not assigned)
0