Issue 4.0
SV9100 Programming Manual 2-17
Description
Use Program 10-04 : Music on Hold Setup to set the Music on Hold (MOH) source. For internal Music
on Hold, the system can provide a service tone to callers on hold, or one of eleven synthesized
selections.
Program 10 : System Configuration Setup
10-04 : Music On Hold Setup
Level:
IN
Input Data
Item
No.
Item Input Data Default Description
01
Music on Hold
Source Selection
0 = Internal MOH
1 = External MOH
2 = Service Tone
3 = VMDB
2
The Music on Hold (MOH)
source can be internal
(synthesized) or from a
customer-provided music
source.
The customer-provided source
can connect to a PGD(2)-U10
ADP or the connector on the
side of the Base Cabinet MOH/
IN connection.
Trunk MOH and Extension
MOH music source use the
same Music on Hold source.
02
Music on Hold
Tone Selection
[If Item 1 is 0]
1 = Download File1
2 = Download File2
3 = Download File3
[If Item 1 is 1, 2, or 3]
1~100 = VRS Message
Number
1
03
Audio Gain Setup
1~57 (-15.5 ~ +12.5dB)
32
(0dB)
04
Sub-Music on Hold
Source Selection
0 = Follow PRG10-04-
01
1 = Internal MOH
2 = External MOH
3 = VMDB
0
To Next Page
Loading...
