NEC Univerge SV9100 - Expansion Calling Party Setup for Extension

Issue 4.0
SV9100 Programming Manual 2-357
Description
Use Program 21-25 : Expansion Calling Party Setup for Extension to define CLI number to an
extension. This program is used only when PRG14-01-38 is set to ‘2’.
Conditions
None
Feature Cross Reference
None
Program 21 : Outgoing Call Setup
21-25 : Expansion Calling Party Setup for Extension
Level:
IN
Input Data
Extension 001~960
Item
No.
Description Input Data Default
01
Expansion Calling Party Setup for Extension
Related Programs: 15-01-04, 20-08-13,
14-01-38
0, 1~9, , # (Max. 16
characters)
None