NEC Univerge SV9100 - ISDN Calling Party Number Setup for Extensions

Issue 4.0
2-348 Program 21 : Outgoing Call Setup
Description
Use Program 21-13 : ISDN Calling Party Number Setup for Extensions to assign each extension a
Calling Party Number (maximum 16 digits per entry). The calling number is the subscriber number of the
dial-in number. When a call is made by an extension which does not have an Extension Calling Number
assigned (Program 21-13), the system sends the calling number for the ISDN trunk defined in Program
21-12.
Conditions
None
Feature Cross Reference

ISDN Compatibility
Program 21 : Outgoing Call Setup
21-13 : ISDN Calling Party Number Setup for Extensions
Level:
IN
NOTE

If a Calling Party Number is assigned in both Programs 21-12 and 21-13, the system sends
the data in Program 21-13.
Input Data
Extension Number 001 ~ 960
Item
No.
Calling Party Number Data Default
01 0~9, , # (Max. 16 digits) No setting