Issue 4.0
SV9100 Programming Manual 2-817
Description
Use Program 90-04 : Load Data to load the system data from the inserted USB Flash Drive to the SRAM
and Flash ROM in the system.
Conditions
After uploading the programming, reset the system and wait a few minutes for the system to reset
completely before accessing any line or special system feature. Otherwise, some unusual LED
indications may be experienced.
Feature Cross Reference
None
Program 90 : Maintenance Program
90-04 : Load Data
Level:
SA
This program is available only via telephone programming and not through PC
Programming.
Item
No.
Item Input Data
01
Load Data
Dial 1+ press Transfer (Press Transfer to cancel)
To Next Page
Loading...
