NEC Univerge SV9100 - SIP System Information Setup

Issue 4.0
2-48 Program 10 : System Configuration Setup
Description
Use Program 10-28 : SIP System Information Setup to set up basic SIP trunking.
Program 10 : System Configuration Setup
10-28 : SIP System Information Setup
Level:
IN
Input Data
Item
No.
Item Input Data Default
Profile
1~6
01
Domain Name
Set the domain name of
the SIP-URL.
Up to 64 Characters
(ex.:UserID@HostName.DomainName)
None
02
Host Name
Set the host name of
the SIP-URL.
Up to 48 Characters
(ex.:UserID@HostName.DomainName)
None
03
Transport Protocol
Set the protocol for the
connection.
0 = UDP
1 = TCP
2 = TLS
0
05
Domain Assignment
If the information from
Telco was a domain
name
(siptrunk@sip.com)
then set to domain. If
the information for
Telco was a IP address
then set to IP Address.
0 = IP Address
1 = Domain Name
0