NEC Univerge SV9100 - Program 35: SMDR Account Code Setup; SMDR Options

SV9100 Programming Manual 2-487
Program: 35
Description
Use Program 35-01 : SMDR Options to set the SMDR (Station Message Detail Recording) options.
Refer to the following chart for a description of each option, its range and default setting.
Program 35 : SMDR Account Code Setup
35-01 : SMDR Options
Level:
IN
Item
No.
Item Input Data Default
01
Output Port Type
Specify the type of connection used for
SMDR.
0 = No setting
1 = Not used
2 = Not used
3 = LAN (CCPU)
4 = Not used
0
03
Header Language
Specify the language in which the SMDR
header should be printed.
0 = English
1 = German
2 = French
3 = Italian
4 = Spanish
0
04
Omit Digits
The number of digits entered in this option
do not print on the SMDR report. For
example, if the entry is 10, the last 10
digits a user dials do not appear on the
SMDR report.
0~24 (0 = Not applied)
0
05
Minimum Digits
Outgoing calls must be at least this
number of digits for inclusion in the SMDR
report.
0~24 (0 = Not applied)
0
06
Minimum Call Duration
The duration of the call must be at least
this time to be included on the SMDR
report.
0~65535 (sec) (0 = All)
0
07
Minimum Ring Time (For Incoming
Calls)
A call must ring for at least this time to be
included on the SMDR report.
0~65535 (sec) (0 = All)
0