Issue 4.0
2-368 Program 22 : Incoming Call Setup
Description
Use Program 22-07 : DIL Assignment to assign the destination extension or Department Calling Group
for each DIL Incoming trunk. A DIL rings an extension directly, without any other Access Map or Ring
Group programming. If an extension has a line key, the DIL rings the line key. If the extension does not
have a line key, the DIL rings CAP keys. Use Program 22-02 to designate a trunk as a DIL. You can
make eight DIL assignments, one for each Night Service mode.
Conditions
Program 22-02 must be set to four for the trunk.
Feature Cross Reference
Direct Inward Line (DIL)
Program 22 : Incoming Call Setup
22-07 : DIL Assignment
Level:
IN
Input Data
Trunk Port Number 001~400
Item
No.
Day/Night
Mode
Number of Transferring Destination Default
01 1~8 Extension Number (maximum eight digits)
Pilot Number
No Setting
To Next Page
Loading...
