NEC Univerge SV9100 - Voice Announcement Service Option

Issue 4.0
SV9100 Programming Manual 2-497
Description
In Program 40-10 : Voice Announcement Service Option define the system options for the Voice
Announcement feature.
Program 40 : Voice Recording System
40-10 : Voice Announcement Service Option
Level:
IN
Input Data
Item
No.
Item Input Data Default
01
VRS Fixed Message
Enable (1)/Disable (0) the system ability to play the
fixed VRS messages (such as, “You have a
message”).
0 = Not Used
1 = Use
0
02
General Message Number
Assign the VRS message number to use for the
General Message.
0~100
0 = No General
Message Service
0
03
VRS No Answer Destination
Assign the transferred Ring Group when the VRS is
unanswered after Call Forwarding with Personal
Greeting Message.
0~100
(Incoming Ring
Group Number)
0
(No Setting)
04
VRS No Answer Time
If an extension has Personal Greeting enabled and all
VRS ports are busy, a DIL or DISA call to the
extension waits this time for a VRS port to become
free.
0~64800 (sec)
0
05
Park and Page Repeat Timer (VRS Msg Resend)
If a Park and Page is not picked up during this time,
the Paging announcement repeats.
0~64800 (sec)
0
06
Set VRS Message for Private Call Refuse
(VRS Msg Private Call)
This item assigns the VRS Message number to be
used as Private Call Refuse.
When Fixed message is set, VRS message guidance
is: “Your call cannot go through.”
0~101
0 = No message
101 = Fixed
message
0