NEC Univerge SV9100 - Page 726

Issue 4.0
2-686 Program 80 : Basic Hardware Setup for System
02
Min. Detection Level
0~15
0 = -10dBm(0) to -25dBm(15)
1 = -15dBm(0) to -30dBm(15)
2 = -20dBm(0) to -35dBm(15)
3 = -25dBm(0) to -40dBm(15)
4 = -30dBm(0) to -45dBm(15)
5 = -35dBm(0) to -50dBm(15)
6 = -40dBm(0) to -55dBm(15)
03
S/N Ratio
0~4 (0dB ~ -20dB)
04
No Tone Time
0~255 (30+30~7680ms)
(0 = not detect)
1~255 = 60~7680ms.
The formula is 30+30N.
When set to N=1, it means 30+30*1=60
When set to N=255, it means
30+30*255=7680
05
Pulse Count
1~255
06
ON Minimum Time
1~255 (30+30~7680ms)
07
ON Maximum Time
0~255 (30+30~7680ms)
08
OFF Minimum Time
1~255 (30+30~7680ms)
09
OFF Maximum Time
0~255 (30+30~7680ms)
12
Frequency No. 1
1~8 (Frequency Table No. set by 80-07)
13
Frequency No. 2
0~8 (Frequency Table No. set by 80-07)
Item
No
Item Input Data