NEC Univerge SV9100 - Page 300

Issue 4.0
2-260 Program 20 : System Option Setup
08
Toll Restriction Dial Block
Turn off or on an extension ability to use Dial
Block.
0 = Off
1 = On
00
09
Hotline/Extension Ringdown
Turn off or on Ringdown Extension for
extensions with this COS.
0 = Off
1 = On
00
10
Signal/Voice Call
Turn off or on an extension allowing it to force
Handsfree Answerback or Forced Intercom
Ringing for outgoing Intercom calls.
0 = Off
1 = On
11
11
Protect for the Call Mode Switching from
Caller
(Internal Call)
0 = Off
1 = On
00
12
Department Group Step Calling
Turn off or on an extension ability to use
Department Group Step Calling.
0 = Off
1 = On
11
13
ISDN CLIP
Determine if the ISDN calling line identity
presentation and screening indicators are
allowed.
0 = Off
1 = On
0 0 10-03-05
15-01-04
14
Call Address Information
0 = Off
1 = On
00
15
Block Outgoing Caller ID
Turn off or on the system ability to automatically
block outgoing Caller ID information when a user
places a call.
If this option is on, the system automatically
inserts the Caller ID block code (defined in
Program 14-01-21) before the user-dialed digits.
0 = Off
1 = On
0 0 14-01-20
14-01-21
16
Display E911 Dialed Extension Name and
Number
Turn off or on an extension ability to display the
name and number of the extension that dialed
911.
0 = Off
1 = On
00
17
ARS Override of Trunk Access Map
Turn off or on an extension user ability to
override the trunk access map programming for
outgoing calls.
0 = Off
1 = On
00
19
Hotline for SPK
Set the ability of an extension to have Hotline
activated or deactivated when going off hook via
the speaker key.
0 = Off
1 = On
0 0 20-08-09
Item
No.
Item
Input
Data
Default
Related
ProgramCOS
01-14
COS
15