NEC Univerge SV9100 - Page 240

Issue 4.0
2-200 Program 15 : Extension, Basic Setup
15
CODEC Type
1-Type 1
2-Type 2
3-Type 3
4-Type 4
5-Type 5
1
Assign the CODEC Type of
the MLT SIP.
84-24-XX
16
Authentication
Password
Up to 24 characters
None
Assign the authentication
password for SIP single line
telephones.
15-05-01
18
IP Duplication
Allow Mode
0 = Disable
1 = Enable
0
Allows one IP Address to be
assigned to multiple
extensions.
15-05-01
19
Side Option
Information
0 = No Option
1 = 8LK Unit
2 = 16LK Unit
3 = 24ADM
0
This is a read only program
that shows what type of Line
Key unit is installed on the
telephone.
10-03-09
15-05-22
20
Bottom Option
Information
0 = No Option
1 = ADA
2 = BHA
0
This is a read only program
that shows what type of
adapter is installed on the
telephone.
10-03-10
21
Handset
Option
Information
0 = Normal Handset
1 = Handset for power
failure (PSA/PSD)
2 = BCH
0
This is a read only program
that shows what type of
Handset is installed on the
telephone.
10-03-11
15-05-23
22
Side Option
Additional Data
0 = No Setting
1~32 = DSS Console
number
0
This is a read only program
that shows the DSS console
number when one is
installed on the telephone.
30-01
30-02
30-03
30-04
30-05
30-06
23
Handset
Option
Additional
Information
0 = No Setting
1~16 = Terminal
equipment number
(TEN) of Bluetooth
Cordless Handset
(BCH)
0 Determine to use TEN or
not.
24
Protection
Service
0 = Not Used
1 = Used
0
When enabled this allows
the MLT SIP telephones to
use the security key. If
disabled, and the key is
pressed, nothing happens.
Item
No.
Item Input Data Default Description
Related
Program