NEC Univerge SV9100 - Page 249

Issue 4.0
SV9100 Programming Manual 2-209
37 DND/FWD Override Call None
38 Message Waiting None
39 Room Monitoring
Rapid Blink (Red): While being
monitored
Slow Blink (Red): While monitoring
40 Handset Transmission
Cutoff
Red On: Transmission cut-off
41 Buzzer Extension Number
Red On: Transmission Side
Rapid Blink (Red): Receiver Side
42 Boss – Secretary Call Extension Number
Red On: Boss – Secretary mode
43 Series Call None
44 Common Hold None
45 Exclusive None
46 Department Group Log Out
Red On: Logged Out
47 Reverse Voice Over Extension Number
Red On: extension busy
Off: extension idle
Rapid Blink (Red): DND or Call
Forward
Green: Reverse Voice Over to
extension in progress
48 Voice Over
Slow Blink (Red): Voice Over – Active
49 Call Redirect Extension Number or Voice
Mail Number
None
50 Account Code
Red On: While account code being
entered
51 General Purpose Relay Relay No (0, 1~ 8)
Red On: Relay On
52 Automatic Answer with
Delay Message Setup
Incoming Ring Group
(001~100)
Red On: Under setting
53 Automatic Answer with
Delay Message Start
Red On: Active
54 External Call Forward by
Door Box
Red On: Active
55 Extension Name Change None
56 General Purpose LED
Operation
Blink (Red): Active
57 General Purpose LED
Indication
Blink (Red): Active
Function Number List (Continued)
[1] Normal Function Code (00 ~ 99) (Service Code 751)
Function
Number
Function Additional Data LED Indication