Issue 4.0
SV9100 Programming Manual 2-215
Conditions
When a key is programmed using service code 752, it cannot be programmed with a function using
the 751 code until the key is undefined (000). For example with a Park Key programmed by dialing
752 +
04 must be undefined by dialing 752 + 000 before it can be programmed as a Voice Over key
by dialing 751 + 48.
When assigning a CAP key, 08, an orbit number must be used. If orbit 000 is used, it automatically
assigns the next available orbit.
Feature Cross Reference
Refer to Function Number List.
LED Indication Reference:
ON = LED pattern 7 (On).
OFF = LED pattern 0 (Off).
Rapid Blink = LED pattern 3 (RW).
Slow Blink (General Function Level) = LED pattern 5 (IL).
Slow Blink (Appearance Function Level) = LED pattern 1 (FL).
Fast Blink = LED pattern 3 (RW).
Stutter Blink = LED pattern 4 (IR).
To Next Page
Loading...
