NEC Univerge SV9100 - Page 297

Issue 4.0
SV9100 Programming Manual 2-257
10
Programmable Function Key Programming
(Appearance Level)
Turn off or on an extension user ability to
program the Appearance function keys using
Service Code 752.
0 = Off
1 = On
1 1 11-11-38
20-13-18
11
Forced Trunk Disconnect (analog trunk
only)
Turn off or on an extension user ability to use
Forced Trunk Disconnect.
0 = Off
1 = On
0 1 11-10-26
12
Trunk Port Disable
0 = Off
1 = On
0 1 11-10-27
13
VRS Record (VRS Msg Operation)
Turn off or on an extension user ability to
record, erase and listen to VRS messages.
0 = Off
1 = On
0 1 11-10-19
14
VRS General Message Play
Turn an extension off or on to dial 4 or Service
Code 611 to listen to the General Message.
0 = Off
1 = On
0 1 11-10-21
15
VRS General Message Record/Delete
Turn off or on an extension user ability to dial
Service Code 612 and record, listen to, or
erase the General Message.
0 = Off
1 = On
0 1 11-10-22
18
SMDR Printout Accumulated Extension
Data
0 = Off
1 = On
0 1 11-10-23
19
SMDR Printout Department Group (STG)
Data
0 = Off
1 = On
0 1 11-10-24
20
SMDR Printout Accumulated Account Code
Data
0 = Off
1 = On
0 1 11-10-25
21
Register and delete DECTPP
0 = Off
1 = On
00
22
--- Not Used ---
23
CO MSG Waiting Indication Callback
Number Programming
Enable/Disable an extension ability to receive
CO Message Waiting Indication.
0 = Off
1 = On
00
24
Set/Cancel Private Call Refuse
Enable/Disable an extension user ability to set
or cancel Private Call Refuse.
0 = Off
1 = On
0 0 11-10-32
25
Set/Cancel Caller ID Refuse
Enable/Disable an extension user ability to set
or cancel Caller ID Refuse.
0 = Off
1 = On
0 0 11-10-33
11-10-34
Item
No.
Item
Input
Data
Default
Related
ProgramCOS
1~14
COS 15