NEC Univerge SV9100 - Page 312

Issue 4.0
2-272 Program 20 : System Option Setup
08
Conference
Turn off or on an extension user ability to initiate a
conference or Meet-Me Conference.
0 = Off
1 = On
11
09
Privacy Release
Turn off or on an extension user ability to initiate a Voice
Call Conference.
0 = Off
1 = On
11
10
Barge-In Monitor
Enable the extension Barge-In Mode to be Speech or
Monitor.
0 = Speech
1 = Monitor
0 0 20-13-45
11
Room Monitor, Initiating Extension
Turn off or on an extension user ability to Room Monitor
other extensions.
0 = Off
1 = On
00
12
Room Monitor, Extension Being Monitored
Turn off or on an extension ability to be monitored by
other extensions.
0 = Off
1 = On
00
13
Continued Dialing (DTMF) Signal on ICM Call
Turn off or on an extension user ability to use Continued
Dialing, which allows DTMF signal sending while talking
on extension.
0 = Off
1 = On
11
14
Department Calling (PLT No Called Extension)
Turn off or on an extension user ability to call a
Department Group Pilot.
0 = Off
1 = On
11
15
Barge-In, Initiate
Turn off or on an extension user ability to barge-in on
other's calls.
0 = Off
1 = On
00
16
Barge-In, Receive
Turn off or on an extension user ability to have other
extensions barge-in on calls.
0 = Off
1 = On
00
17
Barge-in Tone/Display (Intrusion Tone)
Turn off or on the Barge-In tone. If on, callers hear an
alert tone and their display indicates the Barge-In when
another extension barges into their conversation. If off,
there is no alert tone or display indication.
0 = Off
1 = On
11
18
Programmable Function Key Programming
(General Level)
Turn off or on an extension user ability to program
General function keys using Service Code 751 (by
default). (Refer to Program 20-07-10 for Service Code
752.)
0 = Off
1 = On
11
Item
No.
Item Input Data
Default
Related
ProgrammingCOS
01~14
COS
15