Issue 4.0
SV9100 Programming Manual 2-293
Conditions
None
Feature Cross Reference
ISDN Compatibility
12
Call Forward Options (Auto Connect Send)
Incoming Calls Forwarded Out Automatically Return
Connect Message When Outgoing Call Receives
Alerting Message.
0 = Normal – No
Message (Off)
1 = Normal – No
Message (On)
0
13
Local Busy Tone (Release)
Busy tone send when T-point receiving a RELEASE
message from Network.
0 = Off
1 = On
0
14
No Response Release Send
Operation mode setting for when second T303 timer
expires.
0 = Off
1 = On
0
15
Call Reference Selection for PRI 2B-Channel
Transfer
This PRG is used to turn on or off the ability for an
incoming call to be transferred (Trunk-to-Trunk) to an
outgoing call when 2 B-Channel Transfer is used.
0 = Off
1 = On
0
20
Send Sending Complete Information
0 = No Send
1 = Send
0
Input Data (Continued)
Item
No.
Item Input Data Default
To Next Page
Loading...
