NEC Univerge SV9100 - Page 451

Issue 4.0
SV9100 Programming Manual 2-411
Conditions
None
Feature Cross Reference

Direct Inward System Access (DISA)
07
Long Conversation Warning Tone Time
Determine the time a DISA caller or any trunk-to-trunk
(such as Tandem Trunking) conversation can talk before
the Long Conversation tone is heard.
0~64800
(sec)
3600 14-01-25
20-28-01
20-28-02
20-28-03
08
Long Conversation Disconnect Time
Determine the time the system waits before
disconnecting a DISA caller or any trunk-to-trunk (such
as Tandem Trunking) conversation call after the Long
Conversation tone is heard.
0~64800
(sec)
10 14-01-25
20-28-01
20-28-02
20-28-03
09
DISA Internal Paging Time
Enter the maximum length of an Internal Page placed by
a DISA caller. If the Page continues longer than this
time, the system terminates the DISA call.
0~64800
(sec)
30
10
DISA External Paging Time
Enter the maximum length of an External Page placed
by a DISA caller. If the Page continues longer than this
time, the system terminates the DISA call.
0~64800
(sec)
30
11
VRS/DISA Answer Delay Time
Set up the time the system waits after receiving an
incoming VRS/DISA call before the system automatically
answers the call.
0~64800
(sec)
0
13
VRS/DISA Busy Tone Interval
If a DISA caller dials a busy extension (and Program
25-04 = 0), the system plays busy tone for this time
before disconnecting.
0~64800
(sec)
5
14
Delayed VRS Answer Time
Assign the delay time from switching from a normal
incoming status to DID mode. If this time is set to 0, the
call switches to DID mode immediately.
0~64800
(sec)
10
Input Data (Continued)
Item
No.
Item
Input
Data
Default
Related
Program