Issue 4.0
2-774 Program 84 : Hardware Setup for VoIP
65
Video Quality Mode
This program specifies the SIP
station video quality mode when
Peer-to Peer is disabled in 15-05-
50.
Use this program in conjunction with
84-27-20 for Mode 1 and 84-27-21
for Mode 2 video quality settings.
Mode 1 = CIF (352x288)
Mode 2 = VGA (640x480)
0 = Mode 1
1 = Mode 2
0
66
Video CODEC
This program specifies the video
CODEC. At this time only H.264 is
supported.
0 = H.264
0
67
Jitter Buffer Mode for Video
This program sets the jitter buffer
size adjustment. At default this is set
to self adjusting and should only be
changed when directed by support.
1 = Static
2 = Self Adjusting
2
68
Minimum Jitter Buffer for Video
This program sets the minimum
value of jitter buffer for the video
stream.
This value must be smaller than the
value of the maximum jitter buffer.
This value should only be changed
for if needed highly congested
networks.
0 ~ 1000ms
70ms
69
Initial Jitter Buffer for Video
This program sets the initial value of
jitter buffer for the video stream.
This value must be smaller than the
value of the maximum jitter buffer
and bigger than the value of the
minimum jitter buffer.
This value should only be changed
for if needed highly congested
networks.
0 ~ 1000ms
140ms
Input Data (Continued)
Item
No.
Item Input Data Default
To Next Page
Loading...
