NEC Univerge SV9100 - Page 949

Issue 4.0
SV9100 Programming Manual 3-909
Conditions
None
Feature Cross Reference
None
14
Forced Intercom Ring
(ICM Call Type)
Read only.
Indicates ICM Call Type
per extension.
0 = Disable(Voice)
1 = Enable(Signal)
None 11-11-15
11-11-16
15
BGM
Read only.
Indicates BGM setting
status per extension.
0 = Disable
1 = Enable
None 11-11-18
16
Key Touch Tone
Read only.
Indicates Key Touch Tone
setting status per
extension.
0 = Disable
1 = Enable
None 11-11-19
17
Dial Block
Read only.
Indicates Dial Block setting
status per extension.
0 = Disable
1 = Enable
None 11-11-33
18
Repeat Dial
Read only.
Indicates Repeat Dial
setting status per
extension.
0 = Disable
1 = Enable
None
19
Headset Mode Switching
Read only.
Indicates Headset Mode
Switching setting status
per extension.
0 = Disable
1 = Enable
None 11-11-65
20
Headset Ringing Mode
Switching
Read only.
Indicates Headset Ringing
Mode Switching setting
status per extension.
0 = Disable
1 = Enable
None 11-11-43
Input Data (Continued)
Item
No.
Item Input Data Default
Related
Program