Variables and Commands CDHD
406 VarCom Reference Manual
VF
Definition Velocity Loop Output Filter
Type Variable (R/W)
Description Not intended for user unless instructed by Technical
Support.
User defined velocity loop output filter.
Requires FILTMODE 6. or controller output filter in
VELCONTROLMODE 3).
Syntax Read: VF
Write: VF 1 0 0 0 0 0 0
Firmware 1.0.6
Drive status Enabled | Disabled
Range Not Applicable
Default value 1 0 0 0 0 0 0
Unit Not applicable
Non-volatile Yes
See also FILTMODE
VD
VELCONTROLMODE
VH
VR
CANopen 20D8h, sub-index 1
To Next Page
Loading...
