Variables and Commands CDHD
408 VarCom Reference Manual
VH
Definition Advanced Pole Placement H Polynomial
Type Variable (R/W)
Description Not intended for user unless instructed by Technical
Support.
Extended velocity controller H-polynomial.
Syntax Read: VH
Write: VH <value>
Firmware 1.0.6
Drive status Enabled | Disabled
Range Not Applicable
Default value Not Applicable
Unit Not applicable
Non-volatile Yes
See also VD
VELCONTROLMODE
VF
VR
CANopen 20DAh, sub-index 1
To Next Page
Loading...
