Siemens SINAMICS G220 - Page 651

- 8024 -
1
Signals and monitoring functions Variable signaling function 1, 2, 3
© Siemens AG
2 3 4 5 6 7 8
V6.02.00
p3299[0...2] (4.000 ms)
<2><1>
1
0
<1>
0
1 0
1
0
t
<1>
<1>
<1><1> <3>
c3291[0..2]
(0)
Variable signaling
function input signal
Variable signaling
function threshold value
p3295[0..2] (0.000)
Variable signaling function pickup delay [ms]
p3297[0..2] (0)
Variable signaling function dropout delay [ms]
p3298[0..2] (0)
Variable signaling function hysteresis
p3296[0..2] (0.000)
p3290.0 p3290.2 p3290.4
p3290.1
p3290.5
p3290.3
Activate function Comparison with sign
Exceeded
Undershot Undershot
Function 1 Function 2 Function 3
Function 1 Function 2 Function 3
For a value of 0, the delay is disabled. Possible sampling times: 1.000 ms, 2.000 ms, 3.000 ms, 4.000 ms Index [0]: Variable signaling function 1 Index [1]: Variable signaling function 2 Index [2]: Variable signaling function 3
<1> <2> <3>
r3294.0..2 Variable signaling function output signal r3294.0 1 = Function 1 output signal r3294.1 1 = Function 2 output signal r3294.2 1 = Function 3 output signal
<3>
Figure14-219 8024 - Variable messages 1, 2, 3
Functions
14.11Drive functions
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 649