AudioCodes Mediant 8000 - Page 620

Installation & Operation Manual 620 Document # LTRT-92224
Mediant 8000
Parameter Name Type Provisioning Type Description
Registration
Mode
Enum
UserInitRegistratio
ns,SBCInitRegistr
ations,NoRegistrat
ions
Instant Defines the registration mode for
an IP Group:
 User initiates registrations
(default)
 SBC initiate registrations (works
only with User Info file) = Used
when the device serves as a
client (e.g., with an IP PBX).
No registrations needed = The
device adds users to its database
in active state.
Authentication
Mode
Enum
UserAuthenticates
,SBCAuthenticate
sClient,SBCAuthe
nticatesServer
Instant Defines the authentication mode:
 User Authenticates (default) =
The device does not handle the
authentication; however
passes the authentication
messages between the SIP
user agents.
 SBC Authenticates (as client) =
The device authenticates as a
client. It receives the 401/407
response from the proxy
requesting for authentication.
The device then sends the
proxy, the authorization
credentials (i.e., user name and
password) according to one of
the following:
 Account defined in the
Account table (only if
authenticating SERVER-
type IP Group),
 Global username and
password parameters
(only if authenticating
SERVER-type IP Group),
 User Information file, or
 Sends request to users
requesting credentials
(only if authenticating
USER-type IP Group).

SBC Authenticates (as server)
= The device authenticates as a
server (using the User
Information file).