Product Reference Guide
435
Bookland
• The ‘Bookland’ / ISBN code will be formatted as a vendor specific AIM label.
• Prefix must be ASCII characters ‘]X0’
• Length of label data including prefix is 13.
• Examples: ‘]X01234567890’
Code 39
• Check character must be included in label data
• Label length including start, stop and check characters and excluding prefix characters
must meet requirements imposed by the main scanner’s fixed or variable label length
control for this symbology type.
• Start and stop characters “*” must be included in label
• Prefix must be ASCII characters ‘]A0’ or ‘]A1’
• Example: ‘]A0*CODE39.TEST*’
Codabar
• Check character must be included in label data
• Label length including check character and excluding prefix characters must meet
requirements imposed by the main scanner’s fixed or variable label length control for
this symbology type.
• Prefix must be ASCII characters ‘]F0’
• Start stop character sets must meet the matching requirement set forth by the scanner
configuration item CI_CBAR_START_STOP_CHAR_MATCH
• Start stop character sets s must be of the form ABCD/ABCD and must be included in
the label
• Example: ‘]F0s$99.95s’
MSI Plessey
• Check character must be included in label data
• Label length including check character and excluding prefix characters must meet
requirements imposed by the main scanner’s fixed or variable label length control for
this symbology type.
• Prefix must be ASCII characters ‘]M0’
• Example: ‘]M0144769254’
Code 93
• Prefix must be ASCII characters ‘]G0’
• Label length excluding prefix characters must meet requirements imposed by the main
scanner’s fixed or variable label length control for this symbology type.
• Example : ‘]G0Code93-test’
To Next Page
Loading...
