H3C S5120-SI Series Command Reference

1-10
Parameters Function Description
logging
Specifies to log matched
packets.
This function requires that the module
using the ACL support logging.
reflective
Specifies that the rule be
reflective.
Not supported.
fragment
Indicates that the rule
applies to only non-first
fragments.
Without this keyword, the rule applies to all
fragments and non-fragments.
time-range
time-range-name
Specifies a time range for
the rule.
The time-range-name argument takes a
case insensitive string of 1 to 32
characters. It must start with an English
letter.
If you provide the precedence or tos keyword in addition to the dscp keyword, the dscp keyword takes
effect.
Setting the protocol argument to tcp or udp, you may define the parameters shown in Table 1-5
.
Table 1-5 TCP/UDP-specific parameters for advanced ACL rules
Parameters Function Description
source-port operator
port1 [ port2 ]
Specifies one or more
UDP or TCP source
ports.
destination-port
operator port1 [ port2 ]
Specifies one or more
UDP or TCP
destination ports.
The operator argument can be lt (lower than), gt
(greater than), eq (equal to), neq (not equal to),
or range (inclusive range).
The port1 and port2 arguments are TCP or UDP
port numbers in the range 0 to 65535. port2 is
needed only when the operator argument is
range.
TCP port numbers can be represented in these
words: chargen (19), bgp (179), cmd (514),
daytime (13), discard (9), domain (53), echo
(7), exec (512), finger (79), ftp (21), ftp-data
(20), gopher (70), hostname (101), irc (194),
klogin (543), kshell (544), login (513), lpd
(515), nntp (119), pop2 (109), pop3 (110), smtp
(25), sunrpc (111), tacacs (49), talk (517),
telnet (23), time (37), uucp (540
), whois (43),
and www (80).
UDP port numbers can be represented in these
words: biff (512), bootpc (68), bootps (67),
discard (9), dns (53), dnsix (90), echo (7),
mobilip-ag (434), mobilip-mn (435),
nameserver (42), netbios-dgm (138),
netbios-ns (137), netbios-ssn (139), ntp (123),
rip (520), snmp (161), snmptrap (162), sunrpc
(111), syslog (514), tacacs-ds (65), talk (517),
tftp (69), time (37), who (513), and xdmcp
(177).

H3C S5120-SI Series Specifications

General

Brand	H3C
Model	S5120-SI Series
Category	Switch
Language	English