Intel ARCHITECTURE IA-32 User Manual

Multi-Core and Hyper-Threading Technology 7
7-41
Example 7-8 shows the batched implementation of the producer and
consumer thread functions.
Example 7-8 Batched Implementation of the Producer Consumer Threads
void producer_thread()
{ int iter_num = workamount - batchsize;
int mode1;
for (mode1=0; mode1 < batchsize; mode1++)
{ produce(buffs[mode1],count); }
while (iter_num--)
{ Signal(&signal1,1);
produce(buffs[mode1],count); // placeholder function
WaitForSignal(&end1);
mode1++;
if (mode1 > batchsize)
mode1 = 0;
}
}
void consumer_thread()
{ int mode2 = 0;
int iter_num = workamount - batchsize;
while (iter_num--)
{ WaitForSignal(&signal1);
consume(buffs[mode2],count); // placeholder function
Signal(&end1,1);
mode2++;
if (mode2 > batchsize)
mode2 = 0;
}
for (i=0;i<batchsize;i++)
{ consume(buffs[mode2],count);
mode2++;
if (mode2 > batchsize)
mode2 = 0;
}
}

Intel ARCHITECTURE IA-32 Specifications

General

Instruction Set	x86
Instruction Set Type	CISC
Memory Segmentation	Supported
Operating Modes	Real mode, Protected mode, Virtual 8086 mode
Max Physical Address Size	36 bits (with PAE)
Max Virtual Address Size	32 bits
Architecture	IA-32 (Intel Architecture 32-bit)
Addressable Memory	4 GB (with Physical Address Extension up to 64 GB)
Floating Point Registers	8 x 80-bit
MMX Registers	8 x 64-bit
SSE Registers	8 x 128-bit
Registers	General-purpose registers (EAX, EBX, ECX, EDX, ESI, EDI, ESP, EBP), Segment registers (CS, DS, SS, ES, FS, GS), Instruction pointer (EIP), Flags register (EFLAGS)
Floating Point Unit	Yes (x87)