Meter Bridge : Meter Bridge
12 - 287
Meter Bridge
Scope
Pyramix has a dedicated Meter Bridge window.
The
Meter Bridge can present a meter display for every Input strip and Bus present in the current Mixer and exter-
nal Machine configured in the
Monitor : Externals page.
The
Meter Bridge also indicates the currently selected mixer strip with a yellow outline, any strips in Record Ready
condition with a red outline, whether any strips are
Muted or Soloed and optionally shows Ramses Groups and
Fader
Automation mode per strip.
Meter ballistics and alignment are adjustable either manually or via presets.
You do not have to use the
Meter Bridge but, especially when used with Ramses MSC, it offers flexible metering
in one place. With complex Mixers and routing, the Meter Bridge can help to keep things logical.
Note: The Meter Bridge is displayed “Always On Top” of other windows.
Meter Bridge Switch
Before the Meter Bridge Window can be opened it must be switched on in the Settings section of the Mixer Con-
figure Page
:
To Next Page
Loading...
