Mixer : Creating and Configuring Mixers
10 - 239
Creating and Configuring Mixers
If one of the numerous mixer presets does not quite suit your application it is simple to modify an existing mixer,
create one using the Mixer Wizard or design one from scratch. The Wizard can be started from an existing mixer by
right-clicking anywhere on the mixer surface and selecting
Settings > Wizard...
Mixer Configuration Wizard
Select the type(s) of buses required using the check boxes and the number needed from the drop
down lists on the right. Note that a single Mono or Stereo Mix Bus can consist of from 1 - 64 buses,
and a Surround Mix Bus can consist of from 1 - 16 multi-channel stems. Aux Send Buses and Sub-
Group Buses can have from 1 - 8 channels. Click the Next button to move on to the next page.
Select the type(s) of channel strips required using the check boxes and the number needed from the
drop down lists on the right. Click the Next button to move on to the next page.
To Next Page
Loading...
