Tracks and Track Groups : Synchronized Creation/Deletion of Tracks/Strips
5 - 93
Group Tracks per Strips
groups the Tracks as they are assigned to strips. E.g. 12 Tracks assigned to two 5.1 strips
would be grouped as two six-Tracks.
Synchronized Creation/Deletion of Tracks/Strips
Note: When Creating, Deleting or Moving Strips in the Mixer Configuration page (or with the
right mouse button context menus) the connected Tracks are also Created/Destroyed or moved
accordingly.
• This behavior will apply when the Tracks > Synchronize Tracks & Strips is checked.
• When Strips are Created or Moved the Tracks are Created or Moved seamlessly.
• On Deleting a Strip or Strips, only empty Tracks are destroyed. Tracks containing Clips are preserved, dis-
connected and set to minimum size.
Deleting Tracks
Single Track
To delete a Track, first select the Track to delete. Then choose Tracks > Delete from the Project window pull-
down menu. The
Track and all Clips placed on it will be deleted. Note that only the Clip or pointer will be deleted,
not the original
Media File.
Multiple Tracks
You can also delete all Tracks from the selected Track to the last (highest number) by selecting Delete to Last
instead of
Delete.
You can also right-click in the
Track Header to add or delete Tracks.
Routing Tracks to / from the Mixer
When you create a Mixer, Pyramix will automatically create the same number of Tracks as Mixer Input Strips
(channels).
If
Connect automatically as many inputs and outputs as possible is checked, Pyramix will attempt to automat-
ically route the output of each
Track Channel to a corresponding Mixer input Channel, so that with mono Tracks
Track 1 outputs route to Mixer Strip 1 input, Track 2 to Mixer Strip 2, etc.
Similarly, Pyramix will attempt to automatically route each
Mixer Strip Channel output to a corresponding Track
input, so that
Mixer channel 1 output routes to Track 1 input, Mixer channel 2 to Track 2, etc.
With
Stereo Tracks Track 1L and Track 1R Channels will be routed to Mixer Strip 1 by default, Mixer Strip 1’s out-
puts will be routed to Track 1L and Track 1R and so on.
So a 5.1 Multi-channel Track connected to a 5.1 Mixer Strip will be connected to the six channels according to the
Strips Channels Type scheme selected in the Mixer creation wizard or in the Add Tracks dialog.
These default
Track I/O assignments can easily be changed by the user by right-clicking on the Main Mixer Strip
Number in a Mono Track or the
L and R buttons in a stereo Track or the LCRLsRsLfe buttons in a 5.1 Multi-Channel
Track. Please see also:
Adding Strips on page 245
To Next Page
Loading...
