Merging Pyramix - Linking Functions of External and Internal Machines; Synchronizer

Machine Control : External Machines
22 - 503
Note: Only one VCube can be controlled. The default settings are all that is required at the VCube
end.
Transport Control Panel
Port In Use
If you attempt to connect to a port which is already in use an error message appears in the Sony Pipe section of
the Transport Control Panel
Linking Functions of External and Internal Machines
The following functions can be linked in the Settings > All Settings > Remote Control : Machines page by sim-
ply ticking the boxes:
•Play and Record
• Play-Record Toggle
•In / Out Points
• Offset
Please see also: Machine on page 702
Synchronizer
Pyramix will chase an external TimeCode source as a slave, however, a far more satisfactory method is to work with
Pyramix as the master.
External machines, capable of chasing TimeCode can, of course, follow Pyramix as slaves.
Transport Control Panel with Sony Pipe