Merging Pyramix - DUAL Board Settings; Aes Board Settings

Settings : I/O Interfaces
28 - 649
AES Board Settings
The legacy, non SRC, AES board uses the same Settings Page as the AES II. However, the SRC settings will, of
course, be unavailable.
DUAL Board Settings
I/O Interface
Input
AES/EBU 1-8 / Analog 9-12: The first 8 inputs are in AES/EBU format and the four remaining inputs are analog.
Output
AES/EBU 1-8 / Analog 9-12: The first 8 outputs are in AES/EBU format and the four remaining outputs are analog.
Reference
Selects the digital (AES/EBU) input to be used as the clock reference when Pyramix sync is set to Audio Input.
When set to
AUTO, Pyramix searches through all the inputs in ascending order and locks to the first valid source it
finds.
Input Gain (dB)
A gain setting of -12dB to +12dB can be selected for each one of the four analog inputs.