Mixer : Mix !
10 - 203
Mixer Rows
Starting at the top a mixer can contain rows as follows:
Mix Buses Every mixer contains one or more summing Mix Buses. Mono, Stereo and Multi-
channel are all available. Multiple Buses of the same type can be dealt with in two
ways. Either instantiate several of the same type which results in multiple rows of
controls and multiple bus control strips or specify multiple stems, in which case
there is only one row of controls and one bus control strip dealing with two or
more ‘Stems’. The Mix Bus rows also contain the On/Off switch and the panner to
the target Bus(es).
Aux and Sub-group Buses If Aux and or Sub-group Buses are present in the mixer their send controls appear
here.
Effects The Effects row has one or more slots per strip for Plug-ins. In Pyramix all processes
are considered to be effects. Plug-ins can be either native VS3 or VST. The effects
row expands to accommodate the number of plug-ins instantiated in the strips.
Mixer with Strip, Bus and Sub-group colors active
To Next Page
Loading...
