Introduction : Automatic Fades and Crossfades
1 - 32
Automatic Fades and Crossfades
Summary
Auto Deglitching:
When enabled (Ramp length is user definable), Auto Deglitching allows on-the-fly Deglitching in playback when
no fades or crossfades have been created.
This is set globally in Settings > All Settings > Application > Playback/Record
To set Auto Deglitching for individual Clips use: Clips > Properties. Clicking in the Auto Deglitching field opens a
drop-down list with the option to Follow General Settings or to set a value for the Clip between 1.0 [ms] to 5
[ms] in 0.5 [ms] steps.
(The Auto Deglitch action is not visible on Clips, since it only occurs in the playback engine)
Auto Crossfade:
Recording
Set in Settings > All Settings > Project > Record : Post Processing: Auto Cross-Fade.
When enabled (Fade Type and duration is user definable, creates a Fade/Crossfade on Clips being recorded.
Playback
Set in Settings > All Settings > Application > Editing : Drag & Drop: Auto-Crossfade by default - Control key
for Drag & Drop.
Off by default. When checked, a fade will be created on Clips that overlap when they are dragged on top of each
other during editing.
The default X-fade can be modified in the Fade Editor. Simply edit a Crossfade to taste, then “overwrite” the
default X fade. (Click on X Presets : Save Preset and choose Default.
Sample Rate Conversion
Pyramix can convert Clips to the current Project sampling rate, automatically and on-the-fly. It can also convert in
non real-time using the very high quality Merging Technologies HeptaCon Sample Rate Converter.
Please see: Real-time Sampling Rate Conversion on page 683,
Convert - Quick Convert sub-menu on page 65
and Sample Rate Conversion on page 155
To Next Page
Loading...
